Miele G 5811 SC Active Plus handleiding
Handleiding
Je bekijkt pagina 82 van 88
Installation
*INSTALLATION*
82
The Miele Waterproof system
Provided that your dishwasher has been
installed correctly, the Miele Waterproof
system will protect you from water
damage throughout its lifetime.
Water inlet
Health risk due to wash water.
Water in the dishwasher is not drink-
ing water.
Do not drink any water from the dish-
washer.
Health risk and risk of damage
due to contaminated incoming water.
The quality of the incoming water
must correspond to the drinking wa-
ter specification of the country in
which the dishwasher is being oper-
ated.
Connect the dishwasher to a drinking
water supply.
The dishwasher may be connected to
cold or hot water (up to max. 60°C)
supplies.
If energy-saving water heating sources
such as solar energy circulation systems
are used, we recommend connecting to
the hot water connection. This saves
both time and electrical energy costs.
Hot water is used in all programmes.
The water inlet hose is approximately
1.5m long. A 1.5m long, flexible metal
extension hose (tested to 14,000kPa/
140bar) is available as an optional ac-
cessory from Miele dealers or the Miele
Customer Service Department.
A stopcock with a ¾"threaded union is
required for the connection. If a stop-
cock is not available, only a qualified in-
staller may connect the dishwasher to
the drinking water supply.
The water connection pressure must be
between 50 and 1000kPa. If the water
connection pressure is too high, a pres-
sure reducing valve must be fitted.
Bekijk gratis de handleiding van Miele G 5811 SC Active Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Miele |
| Model | G 5811 SC Active Plus |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9229 MB |
