Miele G 5811 SC Active Plus handleiding
Handleiding
Je bekijkt pagina 72 van 88
Problem solving guide
72
Many malfunctions and faults can be easily remedied. You can save time and
money in many cases, as you do not need to contact Customer Service.
More information to help you remedy faults yourself can be found at
www.miele.co.uk/support/customer-assistance.
This section only lists faults that you can remedy yourself. All other faults are
shown in Fault FXX.
Technical problems
Problem Cause and remedy
The control field remains
dark after the dish-
washer has been
switched on with the
button.
The dishwasher is not plugged in.
Insert the plug and switch on at the socket.
The mains fuse has tripped.
Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse
rating).
If the mains fuse trips again, contact the Miele Cus-
tomer Service Department.
The button does not
respond immediately or
only responds once it
has been pressed sev-
eral times.
Energy management: the door was opened or closed
shortly before the button was pressed. As a result,
the dishwasher was already switched on. The elec-
tronic module requires a few seconds to be ready for
operation.
Wait a few seconds after opening or closing the
door.
Then press the button.
The dishwasher stops
during a programme.
The mains fuse has tripped. The display is dark and
the dishwasher cannot be switched on.
Reset the mains fuse (see data plate for minimum
protection rating).
If the mains fuse trips again, contact the Miele Cus-
tomer Service Department.
Bekijk gratis de handleiding van Miele G 5811 SC Active Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Miele |
| Model | G 5811 SC Active Plus |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9229 MB |
