Handleiding
Je bekijkt pagina 20 van 44
Commissioning
20
With a direct Wi-Fi connection, it is
not possible to connect the cooktop
and the ventilation hood to a home
network. Should this be required at a
later date, the direct Wi-Fi connection
between the cooktop and the
ventilation hood must be disconnected
first (see “Signing out of Wi-Fi”).
Reattempting the connection
If it is not possible to connect, 2 and 3
flash or the ventilation hood cancels the
process.
Disconnect the connection to the
ventilation hood (see “Signing out of
Wi-Fi”) and to the cooktop.
Attempt to make the connection
again.
Preparing the remote control
Insert the batteries into the remote
control; see “Cleaning and care –
Inserting/replacing batteries”.
Signing on the remote control
Press and hold the control on the
ventilation hood for approx.
10seconds.
2 will light up constantly, 3 will flash on
and off.
Press the 1 and 3 controls on the
remote control at the same time until
the indicator starts flashing red.
The sign-on process starts.
The indicator light will briefly flash green
if the sign-on process is successful.
2 and 3 will light up constantly on the
ventilation hood.
Confirm the setting on the ventilation
hood with the delayed shutdown
control.
If the sign-on process was not
successful, 2 and 3 will flash.
In this case, repeat the process.
Signing off the remote control
For information about the sign-off
process, see “Commissioning –
Signing off Wi-Fi and remote control”.
Bekijk gratis de handleiding van Miele DA 2247, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Miele |
| Model | DA 2247 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 4754 MB |
