Handleiding
Je bekijkt pagina 17 van 44
Commissioning
17
Settings are made via the ventilation
hood control panel, not via the remote
control.
Selecting extraction mode or
recirculation mode
The ventilation hood can be operated
with either extraction mode or
recirculation mode. The power of the
blower is adapted to suit the selected
mode of operation. The ventilation
hood is set up at the factory for
recirculation mode. The ventilation
hood has to be reset for extraction
mode.
To reset it for extraction mode, the filter
saturation indicator for the charcoal
filter(s) has to be deactivated.
Switch off the blower and the lighting.
Press the control and the
operating-hours control at the
same time.
The charcoal filter symbol and one of
the blower power level indicators will
flash.
Press and hold the control until the
B indicator starts to flash.
Confirm the selection by pressing the
operating-hours control.
All the indicator lights will go out.
Extraction mode has now been set.
If the selection is not confirmed within
4minutes, the system will revert to the
previous setting.
Activating/deactivating
Plug&Play
Switch off the blower and the lighting.
Press the delayed shutdown
control for approx. 10seconds
until 1 lights up.
Then press, in turn:
- the control
- the lighting control and
- the lighting control again
When Plug&Play is deactivated, 1 and 3
will flash.
When Plug&Play is activated, 1 and 3
will light up constantly.
Press the control to activate.
1 and 3 will light up constantly.
Press the control to deactivate.
1 and 3 will flash.
Confirm the setting by pressing the
delayed shutdown control.
All the indicator lights will go out.
Bekijk gratis de handleiding van Miele DA 2247, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Miele |
| Model | DA 2247 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 4754 MB |
