Miele Classic C1 Pure Suction HomeCare PowerLine handleiding

Stofzuiger

Miele

84 pagina's

PDF beschikbaar

Handleiding

FilterBag change indicator (Fig. 23)

Change the FilterBag when the color

marker in the FilterBag change indicator

turns red.

Blocked pores reduce the efficiency of

the vacuum cleaner.

Dispose of the FilterBag when it is full.

Do not attempt to re-use the FilterBag.

Checking the FilterBag change indica-

tor

 Attach the adjustable floorhead or the

floorbrush to the vacuum cleaner (in-

cluded as standard depending on

model).

 Switch the vacuum cleaner on and se-

lect the highest power setting.

 Lift the adjustable floorhead/floor-

brush off the floor a little.

How the FilterBag change indicator

works

The FilterBag change indicator is de-

signed for normal household dust. This

generally contains a mixture of dust,

hair, threads, carpet lint, grit, etc.

However, if the vacuum cleaner has

been used to vacuum up fine dust, such

as saw dust, sand, plaster dust, or flour,

the pores of the FilterBag will become

blocked very quickly.

The indicator will indicate that the Fil-

terBag is “full” even when it is not. The

FilterBag must be replaced if this is the

case.

If, on the other hand, you vacuum up a

significant amount of hair, carpet lint,

etc., the FilterBag will be full to bursting

before the indicator reacts.

Replacing the FilterBag (Fig. 24)

 Press both release buttons at the side

of the hose connector, and lift the

hose from the socket (Fig. 01).

 Pull the release button for the dust

compartment lid upwards and open

the lid as far as it will go(Fig. 08).

The FilterBag has a flap which closes

automatically when the dust compart-

ment lid is raised to prevent any dust

escaping.

 Pull the FilterBag out by the grip on

the collar.

 Insert the new FilterBag into the

holder as far as it will go. Leave the

FilterBag folded up when you take it

out of the box.

 Close the dust compartment lid se-

curely, making sure it clicks into posi-

tion. Take care not to trap the Fil-

terBag when doing so.

An empty operation lock prevents the

dust compartment lid from closing

without a FilterBag in place. Do not

force it.

 Insert the hose connector into the

suction socket on the vacuum cleaner

until it clicks into position(Fig. 01).

Replacing the motor protection filter

(Fig. 25)

Replace the motor protection filter

whenever you start a new packet of Fil-

terBags.

Every packet of original Miele FilterBags

contains a motor protection filter. Multi-

packs contain 4 motor protection filters.

 Open the dust compartment lid.

 Pull the FilterBag out by the grip on

the collar.

Bekijk gratis de handleiding van Miele Classic C1 Pure Suction HomeCare PowerLine, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.