Midea WBMF310 handleiding
Handleiding
Je bekijkt pagina 21 van 67
Connection between washing machine and base station
1. Adjust the footing height of the base station frst
2. Loosen the 4 locking clamps of the base station
3. Stack the washing machine on the base station, observe whether the partition fts well,
adjust the supporting feet of the washing machine and lock the clip
4. Disassemble the wiring of rear sealing door, install the rear sealing door and trim strips
on both sides, and paste sponge strips
Levelling the Machine
The lock nuts on all four feet must be screwed tightly against the housing.
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a spanner.
Make sure the machine is level using a spirit level.
Connect the Water Supply Hose
To prevent leakage or water damage, follow the instructions in this chapter.
• Do not kink, crush or modify water inlet hose.
WARNING
WARNING
20
1. Install the metal tee to the water inlet valve of washing machine
2. Connect the water inlet pipe between the docking station and the tee.
3. Connect the water inlet pipe of the washing machine with 4-way faucet or 4-way angle
valve
Bekijk gratis de handleiding van Midea WBMF310, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | WBMF310 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6329 MB |
