Midea SV 5.14K10C handleiding
Handleiding
Je bekijkt pagina 78 van 147
27
The dishwasher is designed to allow for adjustment in the amount of salt consumed
based on the hardness of the water used. This is intended to optimise and customise
the level of salt consumption.
Please follow the steps below for adjustment in salt consumption.
1. Open the door, switch on the appliance;
2. Within 60 seconds after the appliance was switched on press
the
Program button for
more than 5 seconds to enter the water softener setting mode.
3. Press
the
Program button again to select the proper setting according to your
local water hardness, the setting will change in the following sequence:
H3->H4->H5->H6->H1->H2->H3;
4. Without operation in 5 seconds or press the Power button to complete the setup
and exit the setup mode.
Water Softener
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which would
have a detrimental or adverse effect on the operation of the appliance.
The more minerals there are, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area.
Your local Water Authority can advise you on the hardness of the water in your area.
Adjusting salt consumption
1 dH=1.25 Clarke=1.78 ) fH=0.178mmol/l
WATER HARDNESS
Regeneration occurs
every X program
sequence
1)
Water
softner
level
Salt
consumption
(gram/cycle)
0 - 5
6 - 11
12 - 17
18 - 22
23 - 34
35 - 55
0 - 9
10 - 20
21 - 30
31 - 40
41 - 60
61 - 98
0 - 6
7 - 14
15 - 21
22 - 28
29 - 42
43 - 69
0 - 0.94
1.0 - 2.0
2.1 - 3.0
3.1 - 4.0
4.1 - 6.0
6.1 - 9.8
H1
H2
H3
H4
H5
H6
No regeneration
10
5
3
2
1
0
9
12
20
30
60
German
dH
French
fH
British
Clarke
Mmol/l
Every cycle with a regeneration operation consumes additional 2.0 litres of water, the
energy consumption increases by 0.02 kWh and the program extents by 4 minutes.
The factory setting: H3
1)
EN
Bekijk gratis de handleiding van Midea SV 5.14K10C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | SV 5.14K10C |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 15118 MB |
