Midea ST 3.20N handleiding
Handleiding
Je bekijkt pagina 73 van 78
Problem
The dishesare
not drying
Wrong program has
been selected.
With a short programme, the
washing temperature is lower,
decreasing cleaning performance.
Choose a programme with a long
washing time.
Use of cutlery with a
low-quality coating.
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in
the dishwasher.
Error codes
Codes
Meanings
Possible Causes
Longer inlet time.
Not reaching required
temperature
Heating tube or thermistor anomaly,it
should be repaired by a qualified worker.
A flow meter, drain valve, or pump failure,
it should be repaired by a qualified worker.
Possible Causes What To Do
When some malfunctions come on, the appliance will display error codes to
warn you:
Communication anomaly
It should be repaired by a qualified worker.
Overflow. Some element of dishwasher leaks .
WANING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
DEEN
DE
35
Bekijk gratis de handleiding van Midea ST 3.20N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | ST 3.20N |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 7864 MB |
