Midea RSJ-15 handleiding
Handleiding
Je bekijkt pagina 42 van 48
40
For loss or damage caused by a fault or defect in the installation of the heat pump;
If corrosion has occurred because the anode has not been changed in accordance
with the owner’s manual;
If a cold water expansion valve, check valve and strainer is not fitted in areas where
mains pressure is likely to exceed 0.65MPa;
For any damage arising as a result of an accident, act of God or other circumstances
beyond Midea’s control;
If the inner cylinder has collapsed as a result of an incorrect filling and/or
commissioning procedure;
For components not supplied by Midea that are used in the installation of Midea heat
pump water heaters e.g. tempering valves, cold water valve assemblies, etc.
For extended or implied warranties not formally provided by Midea;
For external labour or equipment costs (e.g. cranes and lifting devices) required for
repairs;
For costs incurred for rectifying faults (or perceived faults) not directly attributed to the
Midea heat pump water heater;
For travel costs of service agents that exceed 30 kilometres;
For all consequential loss or damage arising from defects that can lawfully be
excluded;
For any other issues not directly attributable to defects in components supplied by Midea
including:
(a) Damage caused by incorrect commissioning;
(b) Leakage from valves not supplied by Midea;
(c) Leakage from the pressure temperature relief valve where the water pressure or
temperature exceeds the limits specified in Midea’s installation and maintenance
instructions;
(d) Water hammer;
(e) External rust on the storage tank;
(f) Insucient hot water because:
(i) The consumer refuses to use the auxiliary booster;
(ii) Of an incorrectly set or faulty tempering or mixing valve;
(iii) Of faulty or incomplete installation;
(iv) The water heater is too small for its required purpose;
(v) Of insucient water flow as a result of “water saving” tap-ware or appliances;
(vi) Of blown fuses, “tripped” electrical switches or inadequate household electrical
wiring;
(vii) Insucient water flow caused by debris accumulating in water strainer.
6)
7)
8)
9)
10)
11)
12)
13)
5)
4)
2)
3)
Bekijk gratis de handleiding van Midea RSJ-15, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | RSJ-15 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4550 MB |
