Midea NTY20-22E handleiding

148 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 148
08
OPERATION INSTRUCTIONS
• Overheat protection: When the temperature in the heater is too high due to abnormali-
ty in the use environment or improper use, the thermostat device can automatically cut
off the power and the heater stops working. After the whole heater is cooling, the
heater can return to the normal use after removing the abnormality.
• Inversion protection: When the whole heater is inverted, the safety system will
automatically cut off the power, and return to the work state before inversion after the
body is placed upright.
Safety Protection
Check Before Turning on the Machine
• Check if the power wire is under good condition.
• The product adopts 220-240V AC power supply, before use, please confirm if the
rated current of the power socket meets the local requirements with safe grounding
device, otherwise, please replace it with the qualified socket.
Put the Machine on the Flat Place
• Uneven place may possibly cause the turnover switch at abnormal position, then the
heater can’t work after turning on, therefore, please put the heater on the flat place, at
least the surface below the base of the heater must be flat.
Temperature Control Knob
• Insert the plug into the power socket, then turn the Temperature Control knob
clockwise, when hearing the “poop” sound (it means the temperature controller is on),
adjust the Temperature Control knob to the desired temperature level.
Power Selection Knob
• Turn the Power selection knob to select between 4 functions: Low 1350W(LOW), High
2000W(HIGH), Low 1350W Swing (LOW SWING), High 2000W Swing (HIGH SWING).
Turn off the Heater
• Turn the Power selection knob to OFF position.
• Turn the Temperature Control knob anticlockwise to the initial position.
• Remove the power plug, store the heater after the entire machine has become cool.
EN

Bekijk gratis de handleiding van Midea NTY20-22E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMidea
ModelNTY20-22E
CategorieHeater
TaalNederlands
Grootte9044 MB