Handleiding
Je bekijkt pagina 10 van 18
THERMOSTAT
THERMOSTAT
To set the desired room temperature, rotate the
thermostat switch to the desired setting. After
the set temperature is achieved the thermostat
will automatically start and stop the compressor
in order to maintain the desired set temperature.
Rotate the thermostat selector clockwise for
higher cool settings. Higher cool settings will
provide lower room temperature. Rotate the
thermostat selector counter clockwise for lower
cool settings. Lower cool settings will provide
higher room temperature.
Thermostat
The thermostat is used to set the desired room
temperature when the unit is being operated in
the COOL MODE.
NOTE: During the cooling operation of the unit, when the
thermostat knob is rotated clockwise, allow at least three
minutes before turning back the knob to the COOLER
direction. Otherwise the fuse may blow due to an overload
of the unit.
AUTO SWING
OFF
ON
AUTO SWING(on some models)
Horizontal air flow adjustment (automatically)
When the AUTO SWING switch is turned to ON
position, the vertical louvers automatically oscillate
right and left sweeping the cold air alternately to
obtain comfortable cooling. The vertical louvers may
be stopped at any position when the AUTO SWING
switch is turned OFF .
1
3
6
9
12
To adjust vertical air flow direction of the up or low horizontal
louvers, adjust any one of the up or low horizontal louver blades.
Vertical air flow adjustment (manually)
Up horizontal louver
Low horizontal louver
77
Bekijk gratis de handleiding van Midea MWF-10CMN8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MWF-10CMN8 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 1690 MB |
