Handleiding
Je bekijkt pagina 20 van 68
Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its
functions, then follow the symbol for the functions you desire. The unit can be controlled by the unit
controls alone or with the remote.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
UNIT CONTROL
TO TURN UNIT ON OR OFF:
Press ON/OFF button to t urn u nit o n o r o ff.
NOTE:The unit wil l initiate a utomatically the Energy
Saver function under C ool, Dry, Auto (only
Auto-cooling and Auto-fan) modes.
TO CHANGE TEMPERATURE SETTING:
temperature setting.
NOTE:Press or hold either LEFT
until the desired temperature is seen on the display.
This temperature will be automatically maintained
O O O O
anywhere between 17 C(62 F) and 30 C(86 F). If
you want the display to read the actual room
temperature, see To Operate on Fan Only section.
Press LEFT/RIGTH button to change
( ) or RIGTH ( ) button
TO ADJUST FAN SPEEDS:
Press to select the fan speed in four steps: Auto,
Low, Med or High. Each time the button is pressed,
the fan speed mode is shifted. On Dry mode,the fan
speed is controlled at Low automatically.
SLEEP FEATURE:
Press Sleep button to initiate the sleep mode. In
this mode the selected temperature will increase by
O O
2 F/1(or 2) C 30 minutes after the mode is selected.
O
The temperature will then increase by another 2 F/
O
1(or 2) C after an additional 30 minutes. T his n ew
t emperature w ill be maintained for 6 hours before it
returns to the originally-selected temperature. This
ends the Sleep mode, and the u nit w ill c ontinue t o
o perate as originally programmed. The Sleep mode
program can be cancelled at any time duri
ng
operation by pressing the Sleep button again.
Press Check Filter button to initiate this feature.
This feature is a reminder to clean the air filter for
more efficient operation. The LED (indicator light) will
illuminate after 250 hours of operation. To reset after
cleaning the filter, press the Check Filter button and
the light will go off.
CHECK FILTER FEATURE:
ENERGY SAVER FEATURE:
Press Energy Saver button to initiate this function.
This function is available on COOL, DRY, AUTO
(only AUTO-COOLING and AUTO-FAN) modes.The
fan will continue to run for 3 minutes after the
compressor shuts off. The fan then cycles on for 2
minutes at 10 minute intervals until the room
temperature is above the set temperature, at which
time the compressor turns back on and cooling
starts.
AIR CONDITIONER FEATURES
ADJUSTS
TEMPERATURE
OR TIME
ADJUSTS
TEMPERATURE
OR TIME
DISPLAYS
TEMPERATURE
OR TIME OR ERROR CODES
ACTIVATES
TIMER
CHECK FILTER
RESET BUTTON
SETS MODE
ENERGY
SAVER MODE
SLEEP MODE
SET FAN SPEED
TURNS UNIT
ON OR OFF
/
Bekijk gratis de handleiding van Midea MWAUK-12CRN8-BCJ9, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MWAUK-12CRN8-BCJ9 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 9064 MB |
