Handleiding
Je bekijkt pagina 14 van 44
13
Pre-Assemble the Upper Chimney Cover :
• Remove the protective foil from the Upper Decorative Chimney (2.2).
• Slide the Upper Decorative Chimney trim (2.2) into the Lower Decorative Chimney
trim.
Install Duct and Insert Plug:
• Install 6" duct over the flange on the fan body.
• Use 2" wide metal tape to make an air tight seal between the duct and the fan body.
• Install a clamp to secure the ductwork securely.
• Remove Carbon Filters if installed.
• Insert the plug into a properly grounded outlet.
Assemble the Lower Chimney Cover:
• Slide the Lower Decorative Chimney trim (2.1) over
the fan body.
• Ensure that the Decorative trim is pressed down to
line up the lower mounting holes (A).
• Slightly lift the Upper Decorative Chimney cover.
• Insert 2 short sheet metal screws (12) in the lower
holes.
• Place Chimney mounting bracket (21) at the top of
the Lower Decorative Chimney (2.1), and insert 2
short sheet metal screws (12) into the outer most
holes on the bracket at location B.
WARNING
Electrical Shock Hazard
• This unit must be grounded. This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug must be plugged into an outlet that is
properly installed and grounded.
• Do not use an extension cord. If the power supply cord is too short, have a qualified
electrician install an outlet near the appliance.
12
2.1
Bekijk gratis de handleiding van Midea MVP30W6AST, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MVP30W6AST |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 2805 MB |
