Midea MT100W190 handleiding
Handleiding
Je bekijkt pagina 26 van 29
• Before your maintenance starts, please unplug the machine and close the tap.
Proper maintenance on the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
any water overflow, use the wet cloth to wipe it off immediately.
No sharp items are allowed.
Formic acid and its diluted solvents or equivalent are forbidden, such as
solvents or chemical products,etc.
•
alcohol,
Warning!
！
Note!
Cleaning And Care
• Inlet filter must be cleaned if there is less water.
Note!
Lint filter clean
MAINTENANCE
1.
2.
3.
4.
Press the button head, and pull the lint filter out.
Turn the filter net inside out, and rinse it in water.
After inserting the claw, press the button to insert it into place.
A sound of “ba” means proper installation.
Button head
Claw
Anti-freezing Protection
To prevent from freezing:
If the water is frozen, please take the following steps:
hose completely.
Lay the drain hose and turn the drain selector knob to the "Drain”position to empty
the water in the tub.
1. water
inlet
2.
Turn off the water tap, remove the water inlet hose and empty water in the
.Keep about 2 liters of warm water below 50℃ in the wash
tub for about 10 minutes and then lay the drain hose and
turn the wash drain selector knob to the "Drain”position
to empty the water .
1
2
.Put the water inlet hose into warm water of about 50℃.
Cleaning And Care
Cleaning the Inlet Filter
Cleaning the cabinet
11
Bekijk gratis de handleiding van Midea MT100W190, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MT100W190 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2948 MB |
