Handleiding
Je bekijkt pagina 9 van 28
08
OPERATION INSTRUCTIONS
• Place the heater on a firm, level surface free from obstructions, and at least 3 ft.
(0.9m) away from any wall or combustible material.
• With the Power and Setting Control in the 0 position, plug the heater into a 120V
outlet. Always operate the heater in the upright position.
• To turn the heater on, while turning the Power and Setting Control to the desired
position ( 1 for 500W 2 for 1000W 3 for 1500W ).
• When the room reaches a comfortable temperature, slowly turn the Thermostat
Control counter-clockwise until the heater goes off. This is the point at which the
thermostat setting equals the room temperature. At this setting, the thermostat will
automatically turn the heater on and off to maintain this selected temperature.
• Turn the Power and Setting Control to 0 and unplug the heater when you finish using
it.
NOTE
There is 1 heating tube illuminating at setting 1 and are 2 heating tubes illuminating at
setting 2 and 3 heating tubes illuminating at setting 3.
NOTE
The Safety Protect Bar will be hot while the heater is in use. Do not use it as a carrying
handle. Please use the carry handle in the rear cover when moving the heater.
You may notice vibration/noise coming from the grill and the interior quartz tubes when
the heaters turned on. PLEASE NOTE THAT THIS IS A NORMAL AND SAFE OPERATION.
Once the quartz heating element has warmed, the vibration/noise will go away.
Safety off Switch: This heater is equipped with an automatic Safety Shut off Switch for
overheat protection, which is activated when the internal temperature exceeds normal
operating temperatures. If this occurs, turn the heater to “0”. Unplug the heater and
allow it to cool. Inspect and carefully remove any objects on or adjacent to the heater.
Plug the heater back in and resume normal operation.
Tip Over Switch: This heater includes a Safety Tip-Over Protection Feature which will
shut the heater off in case it is tipped over. If, at any time, the heater does tip over, put
the heater back in the upright position. The heater will resume its normal operation.
If the unit shuts down please operate as follows.
1. Turn the unit off
2. Unplug unit wait 10 minutes
3. Plug in and turn
滚滚长江东逝水
Operating Unit
Safety Features
Reset Instructions
EN
Bekijk gratis de handleiding van Midea MSH20Q3ABB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MSH20Q3ABB |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 1352 MB |
