Handleiding
Je bekijkt pagina 22 van 92
EN
22
CLEANING AND MAINTENANCE
CAUTION
Disconnect the appliance from the electrical
supply before performing any routine
maintenance. Allow at least 5 minutes before
restarting the appliance, as frequent starting may
damage the compressor.
Hold the plug, not the cable, when unplugging
the appliance.
Do not scrape off frost and ice with sharp
objects. Do not use sprays, electric heaters, hair
dryers, steam cleaners or other sources of heat in
order to avoid damage to the plastic parts.
Eliminate the dust on the back of the unit at least
once in the year to avoid hazard by fire, as well as
increased energy consumption.
Check the door gasket regularly to make sure
there is no debris. Clean the door gasket with a
soft cloth dampened with soapy water or diluted
detergent.
The interior of the product should be cleaned
regularly to avoid odor.
Use a soft cloth or sponge to clean the inside
of the product, with two tablespoons of baking
soda and a quart of warm water. Then rinse with
water and wipe clean. After cleaning, open the
door and let it dry naturally before turning on
the power.
For areas that are difficult to clean in the
product (such as narrow gaps or corners), it is
recommended to wipe them regularly with a
soft rag, soft brush, etc. and when necessary,
combined with some auxiliary tools (such as thin
sticks) to ensure no contaminants or bacteria
accumulation in these areas.
Do not use soap, detergent, scrub powder, spray
cleaner, etc., as these may cause odors in the
interior of the product or contaminated food.
Wipe the outer surface of the product with a soft
cloth dampened with soapy water, detergent,
etc., and then wipe dry.
Do not use hard brushes, clean steel balls, wire
brushes, abrasives (such as toothpastes), organic
solvents (such as alcohol, acetone, isoamyl
acetate, etc.), boiling water, acid or alkaline
items, which may damage the fridge surface and
interior. Boiling water and organic solvents such
as benzene may deform or damage plastic parts.
Do not rinse directly with water or other liquids
during cleaning to avoid short circuits or affect
electrical insulation after immersion.
ATTENTION
The appliance shall run continuously once
it is started. Generally, the operation of the
appliance shall not be interrupted; otherwise
the service life may be impaired
Defrosting
The refrigerator is made based on the air-cooling
principle and thus has an automatic defrosting
function. Frost formed due to change of season
or temperature may also be manually removed
by disconnecting the appliance from power
supply or by wiping with a dry towel.
CAUTION!
Don’t use sharp objects to remove frost from
the freezer.
Only after the interior completely dry should
the appliance be switched back on and
plugged back into the mains socket.
Bekijk gratis de handleiding van Midea MRF32I6BST, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MRF32I6BST |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 7750 MB |
