Midea MPC802SAMK handleiding

149 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 149
Disassemble and Install the Block Proof Cover and Seal Ring
1. Please move the product with the handle of the cooker body;
2. Please remove the water from the housing cover with cloth.
1. Check if the seal ring and block proof cover are correctly installed in the upper cover
before use each time.
2. After use, please clean the seal ring and around of block proof cover for avoiding
jamming the cover, keep it clean to avoid bad odor.
1. Please do not pull the seal ring, otherwise, the distorted seal ring may influence the
seal and pressure effect.
2. Do not use the dam aged seal ring, please replace it at the autho rized repair office.
08
Exhaust valve: Pull out the exhaust valve from the lid. Clean the internal side of the
exhaust valve and the exhaust valve and float valve of the lid with brush and cloth at
least once a month.
Sealing ring: Please remove oil and dirt from the sealing ring with detergent and brush.
Water box: After cooking, the steam may stay in the water box of the external pot as
water. Water in the box should be removed for avoiding bad odor, please clean it with
clean cloth.
NOTE
Disassemble and install the block proof cover
Disassemble and install the seal ring
Disassemble
Pull it out upwards
Install
Press it down to install
Disassemble
Pull it out upwards
Install
Press it down to install
Block
proof
cover
Seal
ring
Tips:
INSTALLATION INSTRUCTIONS
EN

Bekijk gratis de handleiding van Midea MPC802SAMK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMidea
ModelMPC802SAMK
CategorieNiet gecategoriseerd
TaalNederlands
Grootte10471 MB