Handleiding
Je bekijkt pagina 17 van 32
Anti-Tip Block
NORMAL INSTALLATION STEPS
ANTI-TIP BLOCK INSTALLATION INSTRUCTIONS To reduce the risk of tipping of the
drawer, the Anti-Tip block must be properly installed located 14
13/16-inches above the floor on which the Microwave Drawer will sit. The 6-inch Anti-Tip
block must be provided by the installer. See Figures 1 and 3. The Anti-Tip block prevents
serious injury that might result from spilled hot liquids.
If the Microwave Drawer is ever moved to a different location, the Anti-Tip block must
also be moved and installed , When installed to the wall make sure that the screws
completely penetrate the dry wall and are secured in wood or metal so that the block is
totally stable. When fastening, be sure that the screws do not penetrate electrical wiring
or plumbing.
Figures 1 and 2 contain many Microwave Drawer measurements for reference when
planning the drawer's location .This Microwave Drawer can be installed below any electric
or gas wall oven.
*Can also be installed using an electrical outlet in an adjacent cabinet within the area
where tire providedelectric al cord can reach. Power cord access hole in cabinet should
be a minimum l 1/2" diameter hole and debarred of all sharp edges.
IMPORTANT
Always allow sufficient power cord length to the electrical outlet to prevent tension
Always check electrical codes for requirements.
EN-16
Bekijk gratis de handleiding van Midea MMB12S2AS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MMB12S2AS |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 1681 MB |
