Midea MLTW44A1AWW handleiding
Handleiding
Je bekijkt pagina 37 van 88
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use Washer Care
Troubleshooting
37
Problem Solutions
Washer stops
• Make sure that the power outlet is a working outlet.
• Check the fuse or reset the circuit breaker.
• Close the lid, then press the Start Pause button to start
your washer. For your safety, your washer does not
spin unless the lid is closed.
• Before your washer starts to fill, it makes a series of
clicking noises to make sure that the lid is locked.
• Sometimes your washer may pause between stages in
the cycle. Wait to see if your washer starts again.
• Disconnect the inlet hoses and clean the screens
periodically. The hose filter screens may be clogged.
Lid is locked
orwill not open
• Press the Start Pause button to pause the washer. You
cannot open the lid if the washer is running.
• After you pause the washer, it may take a few seconds
for the lid lock to release.
• If the lid is locked when your washer is not running,
press the Power button to turn on your washer.
• If power fails while your washer is running, when power
is restored, the lid unlocks. Your washer waits three
minutes then runs the rest of the cycle.
Washer does not
drain or spin
• Check the fuse or reset the circuit breaker.
• Close the lid, then press the Start Pause button to start
your washer. For your safety, your washer does not
spin unless the lid is closed.
• Make sure that the drain hose is not kinked. Straighten
as necessary.
• Make sure that the height of the drain hose is within
specified limits. See Drainage requirements on page 14.
• The pipes to your sewer system may be clogged.
Contact a plumber or qualified repair professional.
The water
temperature
is not correct
• Make sure that you have selected the correct temp.
• Make sure that the water source faucets are fully
opened.
• Make sure that the hoses are connected to the correct
faucet and water intake connections on your washer,
then flush the lines. See Connect the water hoses on
page 19.
• Disconnect the hoses and clean the screens. The hose
filter screens may be clogged.
Bekijk gratis de handleiding van Midea MLTW44A1AWW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MLTW44A1AWW |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 8074 MB |
