Midea MLTW42A2BWW handleiding
Handleiding
Je bekijkt pagina 14 van 81
Water requirements
To fill your washer in the correct amount of time, the water pressure
needs to be between 14 and 116 psi (100 to 800 kPa).
If the water pressure is less than 14 psi (100 kPa):
•
• The time it takes to fill your washer may be longer than the time
error. A time-limit is built into the controls to prevent flooding in
your home if a hose becomes loose.
•
Water inlet hoses must be purchased separately. You can buy inlet
hoses in various lengths up to 8 ft. (240 cm).
To avoid the possibility of water damage:
• Make sure that the water faucets are easily accessible.
•
• Periodically check to make sure that water is not leaking from the
water hose fittings.
Drainage requirements
The height for the drain standpipe must be no shorter than 39 in. (99 cm)
and no higher than 96 in. (244 cm).
The drain hose must be routed through the drain hose clip to the
standpipe.
The standpipe must be large enough to accept the outside diameter of
the drain hose.
14
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Care
TroubleshootingWasher Use
Bekijk gratis de handleiding van Midea MLTW42A2BWW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MLTW42A2BWW |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 9217 MB |
