Midea MLHW52S6BGG handleiding
Handleiding
Je bekijkt pagina 32 van 80
32
Washer
Safety
Operation
Requirements
Installation
Instructions
Washer Use Washer Care
Troubleshooting
Problem Possible Cause What To Do
No power/
washer not
working or
dead
Washer is unplugged
Water supply is turned off
Circuit breaker/fuse is
tripped/blown
Automatic self system
checks
• Make sure cord is
plugged securely into a
working outlet.
• Turn cold faucet fully on.
• Check house circuit
breaker/fuses. Replace
fuses or reset breaker.
Washer should have
separate outlet.
• First time the washer is
plugged in, automatic
checks occur. It may take
up to 2 minutes before
you can use your washer.
This is normal operation.
Snags, holes,
tears, rips
or excessive
wear
Overloaded
Pens, pencils, nails,
screws or other objects
left in pockets
Pins, snaps, hooks, sharp
buttons, belt buckles,
zippers and sharp objects
left in pockets
• The dry weight of the
load should be less than
suggested weight.
• Remove loose items from
pockets.
• Fasten snaps, hooks,
buttons and zippers.
Control time
wrong or
changes
This is normal • During spin the washer
may need to rebalance
the load sometimes
to reduce vibrations.
When this happens,
the estimated time is
increased causing time
left to increase or jump.
Not enough
water
This is normal • Horizontal washers do
not require the tub to ll
with water like top-load
washers.
Washer
pauses or
has to be
restarted, or
washer door
is locked and
will not open
Pump clogged • See page 26 on how to
clean the Pump Filter.
Bekijk gratis de handleiding van Midea MLHW52S6BGG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MLHW52S6BGG |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 8869 MB |
