Handleiding
Je bekijkt pagina 15 van 80
13
Make sure the induction cooker hob is well ventilated and that air inlet and outlet are not blocked. In
order to avoid accidental touch with the overheating bottom of the hob, or getting unexpectable
electric shock during working, it is necessary to put a wooden insert, fixed by screws, at a minimum
distance of 15mm from the bottom of the hob. Follow the requirements below.
• The work surface is square and level, and no structural members interfere with space requirements.
• The work surface is made of a heat-resistant and insulated material.
• If the hob is installed above an oven, the oven has a built-in cooling fan.
• The installation will comply with all clearance requirements and applicable standards and regulations.
• A suitable isolating switch providing full disconnection from the mains power supply is incorporated
in the permanent wiring, mounted and positioned to comply with the local wiring rules and
regulations.
• The isolating switch must be of an approved type and provide a 3 mm air gap contact separation in
all poles (or in all active [phase] conductors if the local wiring rules allow for this variation of the
requirements).
• The isolating switch will be easily accessible to the customer with the hob installed.
• You consult local building authorities and by-laws if in doubt regarding installation.
• You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall surfaces
surrounding the hob.
Before Installing the Hob, Make Sure That
There are ventilation holes around outside of the hob. YOU MUST ensure these holes are not
blocked by the worktop when you put the hob into position.
• Be aware that the glue that join the plastic or wooden material to the furniture, has to resist to
temperature not below 150°C, to avoid the unstuck of the paneling.
• The rear wall, adjacent and surrounding surfaces must therefore be able to withstand an
temperature of 90°C.
WARNING: Ensuring Adequate Ventilation
Min. 15mm
Max. 5mm Max. 5mm
Before installing onto the workbench, it is necessary to stick the sealing strip onto the back of the glass
plate：
• Flip the entire machine over to the back of the glass plate;
• Take out the sponge strip from the self-sealing bag and tear o the double-sided adhesive on the
back of the sponge strip;
• Stick the sponge strip onto
the back of the glass plate.
• The sponge strip should not
exceed the edge of the
glass plate.
spring strip
bottom of the product
Bekijk gratis de handleiding van Midea MIH742F558K1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MIH742F558K1 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6997 MB |
