Handleiding
Je bekijkt pagina 21 van 65
18
Finish cooking
1. Touching the heating zone selection control
that you wish to switch off.
3. Turn the whole cooktop off by touching the
ON/OFF control.
• The cooking zone returns to its original setting after 5 minutes.
2. Turn the cooking zone off by scrolling down to
“0” or touching “-” and “+” control together.
Make sure the display shows “0”.
4. Beware of hot surfaces
H will show which cooking zone is hot to touch.
It will disappear when the surface has cooled
down to a safe temperature. It can also be used
as an energy saving function if you want to
heat further pans, use the hotplate that is still
hot.
If the display flashes alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is placed on it.
OR
Using the Boost function
Activate the boost function
1. Touching the heating zone selection control,
then touching “+”. Make sure the display
shows “9”.
2. Touching the “+” button again ,the zone
indicator show “b” and the power reach Max.
Cancel the Boost function
1. Touching the “-” button to cancel the Boost
function, then the cooking zone will revert
to its original setting.
2. Touching “-” and “+” control together. the
cooking zone switch off and the boost function
cancel automatically.
Bekijk gratis de handleiding van Midea MIH740T463K0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MIH740T463K0 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 4664 MB |
