Handleiding
Je bekijkt pagina 20 van 61
17
1. Touch the ON/OFF control. After power on, the
buzzer beeps once, all displays show “–” or “– –”,
indicating that the induction hob has entered the
state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the
surface of the cooking zone are clean and
dry.
3. Touching the heating zone selection control,
and an indicator next to the key will flash.
4. Select a heat setting by touching the slider
control.
• If you don’t choose a heat setting within 1
minute, the Induction hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
power up
power down
How To Use
Start Cooking
• Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the
cooking zone. Use pans whose diameter is as large as the graphic of the zone selected. Using a pot a
slightly wider energy will be used at its maximum efficiency. If you use smaller pot efficiency could be
less than expected. Pot less than 140 mm could be undetected by the hob. Always centre your pan on
the cooking zone.
• Always lift pans off the Induction hob – do not slide, or they may scratch the glass.
Bekijk gratis de handleiding van Midea MIH740T278W1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MIH740T278W1 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 4487 MB |
