Handleiding
Je bekijkt pagina 33 van 48
08
●
●
●
●
The minimum setting is at the end of the anti-clockwise rotation of the control handle.
All operation positions must be selected between the maximum and minimum position.
The symbol on the control panel,next to the control handle will indicate which burner it
operates.
The appliance is fitted with a flame failure safety device on each burner, which is
designed to stop the flow of gas to the burner head in the event of the flame going out.
QUICK START GUIDE
The following symbols will appear on the control panel, next to each control handle:
Blackcircle: gaso
Largeflame:maximum setting
Smallflame:minimumsetting
How to Use the appliance
Automatic ignition with flame failure safety device
●
●
●
●
●
●
Press in the control knob of the burner that you wish to light and turn it anti-clockwise
to the maximum position.
If you keep the control knob depressed, the automatic ignition for the burner will
operate.
You should hold down the control knob for 15 seconds after the flame on the burner
has lit. If after 15s the burner has not lit, stop operating the device and open the
compartment door and/or wait at least 1 min before attempting a further ignition of
the burner.
After this 15-second interval, to regulate the flame you should continue turning the
control knob anti-clockwise until the flame is at a suitable level. The operating position
MUST be at a position between the maximum and minimum position.
To switch the burner o, turn the control knob fully clockwise to the gas o position.
In case of power failure, the burners can be lit by carefully using a match.
To ignite a burner:
Bekijk gratis de handleiding van Midea MH 604 FX G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MH 604 FX G |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3241 MB |
