Midea MF110W70BA10 handleiding
Handleiding
Je bekijkt pagina 12 van 71
E10
Define: Water injecting problem during wash cycle.
Reasons: The root reason is the water level doesn’t change
within 3 minutes.
Malfunction
code
Root Reason Possible cause
E10
The water level
doesn’t
change within 3
minutes.
If the washer is filling very slowly, the water
pressure from the house might be too low.
The water pressure must be greater than 0.1
MPa.
Water faucet is not turned on or the screens
on the hoses are blocked.
The screens inside the water inlet valve are
blocked or the water inlet valve is damaged.
Something is wrong with water level sensor.
12
5. MALFUNCTION CODES AND EXPLANATIONS
Bekijk gratis de handleiding van Midea MF110W70BA10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MF110W70BA10 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 27141 MB |
