Midea MF110W70 handleiding
Handleiding
Je bekijkt pagina 48 van 71
E64
Step 1
Check whether the harness connecting the wire to the motor is
installed in place, and whether the harness connecting the wire to the
main PCB is not installed in place
① Close the tap and disassemble the 2 screws of the top cover plate. (Fig.1)
② Push back the top cover plate 15mm until it leave away from the control panel and then
take it down. (Fig.2)
③ Check whether the harness connecting the wire to the main PCB is installed in place.(Fig.3)
④ Remove the 4 screws of the rear cover, and show the motor. (Fig.4 & Fig.5)
⑤ Check whether the harness connecting the wire to the motor is installed in place.(Fig.6)
Fig.1 Fig.2 Fig.3
48
Check Procedure:
Fig.4 Fig.5 Fig.6
Step 2
Replace the motor and check whether the problem can be solved
① Remove the Belt. (Fig.7)
② Disassemble the bolt of pulley and pull out the pulley. Disassemble the connector of motor.
Disassemble 2 screws on the motor. (Fig.8)
③ Replace the motor.
Fig.7 Fig.8
5. MALFUNCTION CODES AND EXPLANATIONS
Bekijk gratis de handleiding van Midea MF110W70, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MF110W70 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 27141 MB |
