Midea MF110W60D handleiding
Handleiding
Je bekijkt pagina 11 van 71
4 FACTORY PATTEN DETECTION
11
4.1 Service mode
LED
Display
Check
Target
Check Method
Check Item
t06
Pressure
switch
checking
Press [K7] button to activate inlet valve.
The
inlet valve enters the overflow water level
to display the current water level frequency in
real time.
LED displays the
current water level.
t07
Water
temperature
sensor and
heater
checking
Press [K7] button to activate the main
inlet valve and get the water lever to heating
level then turn on the heater and 5
mins later
turned off automatically.
LED displays the
current temperature.
t08
Inlet valve
checking
1. Press [K7] button;
2. Press [K1] button, switch
off the main wash
inlet valve , s
witch on prewash valve for 5s;
3. Press [K1] button to switch on main wash
and prewash valve and get the water lever to
setting level;
4. Press [K7] button to
drain out the water.
LED displays the
corresponding
status.
t09
Rotating
checking
Press [K7] button, inner drum rotates in
45r/m clockwise for 15s and stop for 10s then
rotates counterclockwise for 15s, over and
over again.
LED displays the
rotation speed.
t10
Spin speed
checking
Press [K7] button , the number on the
display goes up in the same pace with the real
speed and when it reach 400rpm, you need to
press [K1] then [K2] button to get the
machine to reach its target speed.
LED displays the
rotation speed.
Bekijk gratis de handleiding van Midea MF110W60D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MF110W60D |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 28267 MB |
