Midea MF110W100A/W-FR handleiding
Handleiding
Je bekijkt pagina 14 van 71

E10
Step 1
Check the water tap
Step 2
Check the inlet filter
① Close the tap and remove the water supply hose. (Fig.2)
② Clean the filter with a brush if it is blocked. (Fig.3)
③ Unscrew the water supply hose from the backside of the machine. Pull out the filter with
long nose pliers. (Fig.4)
④ Clean the filter with a brush if it is blocked. (Fig.5)
Fig.2 Fig.3 Fig.5Fig.4
Step 3
Check the water inlet valve
① Close the tap and disassemble the 2 screws of the top cover plate. (Fig.6)
② Push back the top cover plate 15mm until it leave away from the control panel and then
take it down. (Fig.7)
③ Measure the resistance value of the water inlet valve, 3-6kΩ is OK. (Fig.8)
④ If the resistance value of the water inlet valve is not well, change the water inlet valve. (Fig.9)
① Check the water tap and open it fully if it is not. (Fig.1)
Fig.6 Fig.7 Fig.9Fig.8
Fig.1
14
Check Procedure:
5. MALFUNCTION CODES AND EXPLANATIONS
Bekijk gratis de handleiding van Midea MF110W100A/W-FR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Midea |
Model | MF110W100A/W-FR |
Categorie | Wasmachine |
Taal | Nederlands |
Grootte | 28267 MB |