Midea MF10EW80B handleiding
Handleiding
Je bekijkt pagina 14 van 37
4 FACTORY PATTEN DETECTION
14
5.1 Service mode
LED
Display
Check
Target
Check Method
Check Item
t14
Reliability
run times
tests
1. Power on and enter into service mode;
2. Press [K1] or [K2] to select“t14”,
press [K5]
to confirm.
3. Reliability Run times Test allows to see the
recorded number of controller runs
(programs greater than 55 minutes).
4. Press [K5] again to enter the test and
display "LFE".
5. Press [K5] to exit the detection, and the
controller displays "T14"
No need
(temporarily
useless)
t15
Not suitable
t16
Factory rapid
dewatering
mode
1. Press [K2] [K4] [K2] [K4] in turn, lock the
door and show "--" waiting to enter the
service test mode;
2. When waiting to enter the service mode,
during the drainage process (there is
residual water in the bucket), it can enter
the rapid dewatering mode of T16 plant
according to [K4];
3. Display "Spn" and turn on the drainage
pump. After empting, the dehydration
speed is accelerated to 1000rpm for 10S at
10rpm, and then maintained at 1000rpm for
10S.
4. Shut down the motor and the drainage
pump.
1. Exit the test mode and display "T16".
LED displays the
rotation speed.
Bekijk gratis de handleiding van Midea MF10EW80B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MF10EW80B |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12197 MB |
