Midea MF10EW80B handleiding
Handleiding
Je bekijkt pagina 11 van 37
4 FACTORY PATTEN DETECTION
11
5.1 Service mode
Before entering into service mode, make sure no water remains in the inner
drum, if not, select drain only program to drain them out.
Turn on the machine and take turns [K2] [K4] [K2] [K4] buttons in 10s to enter
into service mode. Press [K1] or [K2] to select test program. Press [K5] to confirm
your selection and start the selected test. If you want to go back to test selection
interface, press the [K5] to cancel previous selection.
LED
Display
Check
Target
Check Method Check Item
t01
Version
switchover
1. Press [K5] button;
2. Press [K2] or [K3] to change version;
3. Press [K2] button continuously for 3s to
confirm your change.
LED displays“xxx”
x means current
version
t02
Error code
checking
1. Power on and enter into service mode;
2. Press [K1] or [K2] to select“t02”,
press [K5]
to confirm.
LED displays
“Exx”
x means error code
t03
Version
information
checking
1. Power on and enter into service mode;
2. Press [K1] or [K2] to select“t03”,
press [K5]
to confirm.
3. LED displays project number and version
number in turn.
LED
displays project
number and
version number
K1 K2
K3 K4
K5
Bekijk gratis de handleiding van Midea MF10EW80B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MF10EW80B |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12197 MB |
