Midea MF100W90BA handleiding
Handleiding
Je bekijkt pagina 3 van 37
3
When performing troubleshooting and part replacement during servicing, note the
following safety
precautions:
1.1 Safety Precautions
1.1.1 Use Genuine Parts
The components of the washing machine have safety features such as non-combustibility
and voltage with standing. Therefore, always use the same part as suggested by the maker.
In particular be sure
to use only designated parts in case of major safety parts identified by the marker.
1.1.2 Grounding
Connect the grounding wire to the shell plate ,and bury it under at least 25cm of earth:
alternatively, connect the ground wire to the appropriate pin on a properly grounded
power receptacle. Never connect the wire to a telephone line, lightning rod, or gas pipe.
1.2 Servicing Precautions
1.2.1Observe Warnings
Be sure to follow special warning and precautions that are described on part labels and in
the owner'
manual.
1.2.2 Parts Assembly and Wiring
Be sure to use insulation material(such as tube and tape).And be sure to restore all parts
and wires to their original position. Take special care to avoid contact with sharp edges.
1.2.3 Perform Safety Checks after Servicing
After servicing, check to see that the screws, parts, and wiring are restored to their
original positions, and check the insulation between the external metals and the socket
plug. In addition, place the washing machine in a level position (less than1 degree)to
prevent vibration and noise during operations.
Check to see that the resistance insulation between the terminals of the plug and the
externally exposed metal is greater than 1M .
1.3 Warning
1.3.1Before use, the washer must be properly installed as described in user manual.
1.3.2ALWAYS follow the fabric care instructions supplied by the garment manufacturer.
1.3.3Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or spotted
with gasoline, dry-cleaning solvents, other flammable or explosive substances as they give off vapors that
could ignite or explode.
1.3.4Do not reach into the appliance if the basket is moving.
1.3.5Do not install or store this appliance where it will be exposed to the weather or freezing
temperatures.
1.3.6Do not tamper with the controls.
1.3.7Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash
water. These substances give off vapors that could ignite or explode.
1.3.8Under certain conditions, hydrogen gas may be produced in a hot water system that has not been
used for 2 weeks or more.
1.3.9HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for 2 weeks or more,
before using a washer or combination washer-dryer, turn on all hot water faucets and let the water flow
from each for several minutes. This will release any accumulated hydrogen gas. As the gas
1 PRECAUTION
Bekijk gratis de handleiding van Midea MF100W90BA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MF100W90BA |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12197 MB |
