Handleiding
Je bekijkt pagina 41 van 44
19
EN
Problem Possible reason
Door seal fails to be
tight
• Remove foreign matters on the door seal.
• Heat the door seal and then cool it for restoration (or blow
it with an electrical drier or use a hot towel for heating).
Water pan
overflows
• There is too much food in the chamber or food stored
contains too much water,resulting in heavy defrosting.
• The doors are not closed properly, resulting in frosting due
to entry of air and increased water due to defrosting.
Hot housing
• Heat dissipation of the built-in condenser via the housing,
which is normal. When housing becomes hot due to
high ambient temperature, storage of too much food or
shutdown of the compressor is shut down, provide sound
ventilation to facilitate heat dissipation
Surface
condensation
• Condensation on the exterior surface and door seals of the
refrigerator is normal when the ambient humidity is too
high. Just wipe the condensate with a clean towel.
Abnormal noise
• Buzz: The compressor may produce buzzes during
operation, and the buzzes are loud particularly upon start
or stop. This is normal.
• Creak: Refrigerant flowing inside of the appliance may
produce creak, which is normal.
Defrosting interval claim
Environmental
temperature
Interval between two
defrosting cycles
Time Specific conditions
32°C
Minimum two defrosting
intervals (
△
td-min)
12h
Heavy use, frequent opening of
doors
Maximum two defrosting
intervals (
△
td-max)
96h
Under low humidity conditions,
there is no door opening action
and no special mode is set
Bekijk gratis de handleiding van Midea MDRE411FGE01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MDRE411FGE01 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3148 MB |
