Handleiding
Je bekijkt pagina 29 van 69
Service Manual_
29
7.6 Evaporator and Defrost system
Evaporator in freezing chamber
1）Remove the air duct components in freezing and
variable temperature chamber.
2）Disconnect all connecting terminals.
3）Remove the welding on inlet and outlet tubes.
4）Remove the two screws from the return air hood
4）Remove the evaporator.
Components on the evaporator
Defrost heater with defrost sensor and fuse, it can be
replaced separately.
1） Cut off wiring terminal
2） Cut off the band which fixes the sensor
3） Cut off the band which fixes the fuse
4） Separate the sensor and the evaporator
5） Take off the defrost heater from the supporting plate
of evaporator
Evaporator in refrigerating chamber
None
7.7 Compressor case
Rear cover
None
Piping and parts in the compressor case
Bekijk gratis de handleiding van Midea MDRB548MME46, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MDRB548MME46 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 18551 MB |
