Midea MDF24P2BBB handleiding
Handleiding
Je bekijkt pagina 36 van 120
DISHES ARE DAMAGED DURING A CYCLE
PROBLEM POSSIBLE CAUSE SOLUTION
Dishes are chipped
NOTE: Some types of
china and glassware
might be too delicate
for automatic dish
washing. Wash by
hand.
Dishes not loaded
properly.
Load the dishes and
glasses so they are
stable and will not strike
together from washing
action.
Moving the rack
in or out of the
dishwasher too
quickly.
Minimize chipping by
moving the rack in and
out slowly.
36
Safety
Precautions
Operating
Requirements
Parts and
Features
Start Up
Guide
Controls
Dishwasher
Loading
Dishwasher
Use
Dishwasher
Care
Troubleshooting
ERROR C
ODES
CODE MEANING POSSIBLE CAUSE
POSSIBLE SOLUTION
Express light flashes
and dishwasher
beeps for 30
seconds
Either the water
flow is insucient,
or the water
pressure from the
incoming line is
too high
• Make sure that the water is turned on
to the dishwasher.
• Make sure that the water pressure is
20~100 psi.
• Check the drain hose.
• Contact Customer Service.
Normal thgil
flashes and
dishwasher beeps
for 30 seconds
Overflow or leak
sensor activated
• Faucet is not opened
• Water pressure is too low
• The drain hose is plugged.
• Other (parts failure of inlet or
drain system).
• A leak
• Too much water in the
tub
Turn o water to the dishwasher,
then check the filter system for
blockage. Unblock if necessary.
If there is no water in the tub, contact
Customer Service
flash and
dishwasher beeps
for 15 seconds
Communication
exception or issue
The display board can’t receive
or a dnes t’nac draob niameht
signal for over 20 seconds
Contact Customer Service.
Heavy, Normal and
Express lights
Bekijk gratis de handleiding van Midea MDF24P2BBB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MDF24P2BBB |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12985 MB |
