Handleiding
Je bekijkt pagina 14 van 36
13
INSTALLATION
Level Adjusting
Once in its permanent operating position, check that
the dryer is absolutely level with the aid of a spirit level.
If it is not, adjust the feet by hand or using a tool.
Power Supply Connection
4. To keep vibration and noise within minimum level when the dryer is in use, it must
be placed on a firm and level surface.
5. The feet must never be removed.
1.Make sure that the voltage of the power supply is the same as the electric specification.
2.Do not connect the dryer with the power connection board, a universal plug or socket,
do not use multi-plug adapters and extension cables.
• Leave it to stand for 2 hours after transporting. Before first use, please use
a soft fabric to clean the inside drum.
1. Put some clean rags into the drum.
2.Plug the power, press 【On/Off 】.
3. Select the 【Refresh】 Programme, press 【Start/Pause】 button.
4. After finishing this programme, please follow the “Cleaning and Care ”
(refer to page 27) to clean the door filters.
• During drying, the compressor and the water will generate some noise
which is entirely normal.
Note!
Bekijk gratis de handleiding van Midea MD20EH100WB-A3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MD20EH100WB-A3 |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 2796 MB |
