Handleiding
Je bekijkt pagina 17 van 61
14
1. The ceramic cooker hob must be installed by qualified personnel or technicians. We have
professionals at your service. Please never conduct the operation by yourself.
2. The ceramic cooker hob shall not be mounted to cooling equipment, dishwashers and rotary dryers.
3. The ceramic cooker hob shall be installed such that better heat radiation can be ensured to enhance
its reliability.
4. The wall and induced heating zone above the work surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6. A steam cleaner is not to be used.
7. This ceramic can be connected only to a supply with system impedance no more than 0.427 ohm. In
case necessary, please consult your supply authority for system impedance information.
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the
controls protruding from the hob.
Fix the hob on the work surface by screw the brackets on the bottom of hob (see picture) after instal-
lation. Adjust the bracket position to suit for dierent work surface’s thickness.
Before Locating the Fixing Brackets
CAUTIONS
Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after
installation (see picture).
HOB
TABLE
BRACKET
Bekijk gratis de handleiding van Midea MCH300D111K0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MCH300D111K0 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3720 MB |
