Handleiding
Je bekijkt pagina 15 van 61
12
• Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50mm space shall be preserved around the
hole. Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant and
insulated work surface material (Wood and similar fibrous or hygroscopic material shall not be used
as work surface material unless impregnated) to avoid the electrical shock and larger deformation
caused by the heat radiation from the hotplate. As shown below:
• The ceramic cooker hob can be used on the table top of cabinet. The ceramic hob should be placed
horizontally. As shown below:
Under any circumstances, make sure the ceramic cooker hob is well ventilated and the air inlet and
outlet are not blocked. Ensure the ceramic cooker hob is in good work state. As shown below.
Selection of Installation Equipment
PRODUCT INSTALLATION
Note: The safety distance between the sides of the hob and the inner surfaces of the worktop
should be at least 3mm.
Note: The safety distance between the hotplate and the cupboard above the hotplate should be at
least 760mm.
A(mm) B(mm) C(mm) D(mm) E(mm) F(mm)
50 mini 50 mini 50 mini 50 mini 3 mini
G(mm)
A B
50mm mini 50mm mini
268(+4/-0)
490(+4/-0)
B
A
SEAL
G
Min.3mm
C
A
B
D
E
F
Bekijk gratis de handleiding van Midea MCH300D111K0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MCH300D111K0 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3720 MB |
