Handleiding
Je bekijkt pagina 13 van 115
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50 cm space shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant and insulated
work surface material (Wood and similar fibrous or hygroscopic material shall not be used as work
surface material unless impregnated) to avoid the electrical shock and larger deformation caused by
the heat radiation from the hotplate. As shown below:
12
PRODUCT INSTALLATION
Under any circumstances, make sure the ceramic cooker hob is well ventilated and the air inlet and
outlet are not blocked. Ensure the ceramic cooker hob is in good work state. As shown below.
Selection of Installation Equipment
Note: The safety distance between the sides of the hob and the inner surfaces of the worktop
should be at least 3mm.
Note: The safety distance between the hotplate and the cupboard above the hotplate should be at
least 500mm.
wall
Min.30
500
560±2
480±2
Min.50
Min.50
Min.50
Min.660
Min.580
Min.50
Min.3
520
590
47
557.6
478.7
51
Min.30
Min.660
Min.590
480±2
560±2
Min.50
Min.50
Min.50
Min.50
524
594
Min.3
6
min. 20
min.25
min.500
min
.
5
Min.3
Min.3
Unit: mm
Unit: mm
*Standard Installation
*Flush-Mounted Installation
Ventilation gap: min 5
Min.30
Bekijk gratis de handleiding van Midea MC-6F6004R242, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MC-6F6004R242 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 8501 MB |
