Handleiding
Je bekijkt pagina 15 van 40
15
11
TO ADJUST FAN SPEEDS:
Press the Fan button to select the Fan
Speed in four steps-Auto, Low, Med or High.
Each time the button is pressed, the fan
speed mode is changed. On Dry mode, the
fan operates on Low speed automatically.
SLEEP FEATURE:
Press the Sleep button to initiate the
sleep mode. In this mode the selected
temperature will increase by 2°F/1 (or 2)°C
30 minutes after the mode is selected.
The temperature will then increase by
another 2°F/1 (or 2)°C after an additional
30 minutes. This new temperature will be
maintained for 6 hours before it returns
to the originally selected temperature.
This ends the Sleep mode and the unit
will continue to operate as originally
programmed. The Sleep mode program can
be cancelled at any time during operation
by pressing the Sleep button again.
CHECK FILTER FEATURE:
This feature is a reminder to clean the Air
Filter for more ecient operation. The light
will illuminate after 250 hours of operation.
To reset after cleaning the filter, press the
Check Filter button and the light will go o.
ENERGY SAVER FEATURE:
Press the Energy Saver button to initiate
this function. This function is available on
COOL, DRY, AUTO (only AUTO-COOLING
and AUTO-FAN) modes. The fan will
continue to run for 3 minutes after the
compressor shuts o. The fan then cycles
on for 2 minutes at 10 minute intervals until
the room temperature is above the set
temperature, at which time the compressor
turns back on and Cooling resumes.
TO SELECT THE OPERATING MODE:
To choose operating mode, press the
Mode button. Each time you press the
button the unit cycles through the modes,
Auto, Cool, Dry, and Fan. The adjacent
indicator light will remain on once the
mode is selected.
The unit will automatically initiate the
Energy Saver function under Cool, Dry,
Auto (only Auto-Cooling and Auto-Fan)
modes.
To operate on Auto feature:
• When you set the air conditioner to
AUTO mode, it will automatically select
cooling or fan only operation depending
on what temperature you have selected
and the current room temperature.
• The air conditioner will control room
temperature automatically according to
the temperature you’ve set.
• In this mode
, the fan speed cannot be
adjusted, as it’s automatically controlled
according to the temperature setting
and room temperature.
To operate on Fan Only:
• Use this function only when cooling is not
desired, such as for room air circulation
or to exhaust stale air (on some models).
(Remember to open the vent during
this function, but keep it closed during
cooling for maximum cooling eciency.)
You can choose any fan speed you prefer.
• During this function, the display will show
the actual room temperature, not the set
temperature as in the cooling mode.
• In Fan Only mode, the temperature is
not adjusted.
To operate on Dry mode:
In this mode, the air conditioner will
generally function as a dehumidifier.
Since the conditioned space is a closed
or sealed area, some degree of cooling
will occur.
Bekijk gratis de handleiding van Midea MAW25S2ZWT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MAW25S2ZWT |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4599 MB |
