Handleiding
Je bekijkt pagina 8 van 44
8
Operation of Current Device
The power supply cord contains a current measuring device that detects
damage to the power cord. Test your power supply cord as follows:
1. Plug in the air conditioner.
2. The power supply cord will have TWO buttons on the plug head.
Press the TEST button. You will notice a click as the RESET button
pops out.
3. Press the RESET Button. You will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On
some products this is also indicated by a light on the plug head.)
RESET
TEST
Plug in &
press RESET
The power supply cord with this air conditioner contains a current
detection device designed to reduce the risk of fi re.
In the event that the power supply cord is damaged, it can not be
repaired. It must be replaced with a cord from the manufacturer.
NOTE
• Do not use this device to turn the unit on or off.
• Always make sure the RESET button is pushed in for correct
operation.
• The power supply cord must be replaced if it fails to reset when either
the TEST button is pushed, or it can not be reset. Please contact
Customer Service.
NOTE
Do not, under any
circumstances, cut,
remove or bypass
the grounding prong.
Power supply cord with
3-prong grounding plug and
current detection device.
Grounding type wall receptacle
Do not, under any
circumstances, cut,
remove or bypass
the grounding prong.
Bekijk gratis de handleiding van Midea MAW12U2QWT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MAW12U2QWT |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5221 MB |
