Handleiding
Je bekijkt pagina 25 van 36
23
Get to know the features.
Air conditioner features
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
Please always wait 3 minutes when turning unit o then on again, and when changing from cool to fan and back to cool. This prevents
compressor from overheating & possible circuit breaker tripping.
Electronic control operating instructions
Dierent models have dierent control buttons and indicator lights. Not all the control buttons and indicator lights describing below are
available for the unit you purchased. Please check the control panel of the unit you purchased. The unit can be controlled by the unit
control alone or with the remote.
Ion or clear air may be instead of SMART or WIRELESS or CONNECT for some models. Heat, clean air, ion, smart, Wireless, Connect and
follow me features are optional.Ion, clean air is not applicable for R32/R290 units. These features may not be available on some models.
The outline of the operation panel is based on typical model, the function is thesame with your air conditioner while some dierence may
exist in appearance.
NOTE
1. TO TURN UNIT ON OR OFF:
NOTE: The unit will initiate automatically the
Energy Saver function under Cool, Dry and Auto
modes.
Press POWER button to turn unit on or o.
2. CLEAN AIR(ION)/SMART(WIRELESS
or CONNECT)FEATURE(Optional):
Press Clean Air(ION) button,the ion generator is
energized and will help to remove pollen and
impurities from the air, and trap them in the filter.
Press SMART(WIRELESS or connect) button for 3
seconds to turn o the unit and initiate SMART
(WIRELESS or connect)connection mode.
3. TO CHANGE TEMPERATURE SETTING:
NOTE: Press or hold either UP or DOWN
button until the desired temperature is
shown on the display. This temperature
will be automatically maintained
anywhere between 62°F(17°C) and
86°F (30°C). If you want the display to
read the actual room temperature,
see“ To Operate on Fan Only ’’section.
4. SLEEP FEATURE:
Press Sleep button to initiate the sleep
mode. In this mode the selected
temperature will increase (cooling)
or decrease (heating) by 2°F/1°C
30 minutes after the mode is selected.
The temperature will then
increase (cooling) or decrease (heating)
by another 2°F/1°C after an additional
30 minutes. This new temperature will
be maintained for 6 or 7 hours before
Press UP/DOWN button to change temperature
setting.
it returns to theoriginally selected temperature.
This ends the Sleep mode and the unit will continue
to operate as originally programmed. The Sleep
mode program can be cancelled at any time during
operation by pressing the Sleep button again.
6
7
9
10
3
1
5
4
11
Bekijk gratis de handleiding van Midea MAW12H2ZWT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MAW12H2ZWT |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2575 MB |
