Handleiding
Je bekijkt pagina 24 van 48
24
TIMER button
•
SWING button
Used to initiate the Auto swing
feature. When the operation is ON,
pressing the SWING button can stop
the louver at the desired angle.
Wireless operation (on some models):
•
For the first time to use Wifi
function, press the SWING button
for 3 seconds to initiate the Wifi
connection mode. The LED DISPLAY
shows ‘AP’ to indicate you can
set Wifi connection. If connection
(router) is successful within 8
minutes, the unit will exit Wifi
connection mode automatically and
the Wireless indicator illuminates.
If connection is failure within
8 minutes, the unit exits Wifi
connection mode automatically.
After a successful Wi-Fi connection,
press and hold the POWER and
DOWN buttons simultaneously for
3 seconds to disable the Wi-Fi
function. The LED display will show
"OF" for 3 seconds. To enable the
Wi-Fi function again, press and hold
the POWER and UP buttons
simultaneously, and the LED display
will show "On" for 3 seconds.
6
7
2. To operate on COOL mode:
• Choose Cool Mode to set the
cooling function. Use the Up and
Down buttons to choose the
desired temperature. When Cool
Mode is selected, the fan speed
can be adjusted by pressing the
fan button.
3. To operate on Dry mode:
•
In this mode, the air conditioner will
generally operate as a dehumidifier.
Since the conditioned space is
a closed or sealed area, some
degree of cooling will continue.
On Dry mode, the fan speed is not
adjustable.
4. To operate on Fan Only:
•
Use this function only when
cooling is not desired, such as for
room air circulation or to exhaust
stale air (on some models).
(Remember to open the vent
during this function, but keep it
closed during cooling for maximum
cooling efficiency.)
• In Fan only mode, the temperature
is not adjusted.
•
Press or hold the or button
to change the Auto time by 0.5
hour increments, up to 10 hours,
then at 1 hour increments up to 24
hours. The control will count down
the time remaining until start.
<
<
•
• Turning the unit ON or OFF at any
time or adjusting the timer setting
to 0.0 will cancel the Auto Start/
Stop timed program.
The selected time will register
in 5 seconds, and the system
will automatically revert back to
display the previous temperature
setting or room temperature when
the unit is on. When the unit is off,
there is no display.
Press Timer button, the TIMER
indicator light illuminates. lt
indicates the Auto Start or Auto
Stop program is initiated. For
some units, continuing to press the
Timer button will cancel the timer
settings.
Bekijk gratis de handleiding van Midea MAW08V1YWT-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | MAW08V1YWT-S |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4788 MB |
