Handleiding
Je bekijkt pagina 148 van 180
Electrical work preparation
4
26
CORRECT
Make sure there are no
kinks or dent in drain hose
to ensure proper drainage.
NOT CORRECT
Kinks in the drain hose
will create water traps.
NOT CORRECT
Do not place the end of
the drain hose in water or
in containers that collect
water. This will prevent
proper drainage.
NOT CORRECT
Kinks in the drain hose
will create water traps.
Make sure to arrange the drain hose according to the following figures.
NOTE ON DRAIN HOSE PLACEMENT
BEFORE PERFORMING ANY ELECTRICAL WORK, READ THESE REGULATIONS
1. All wiring must comply with local and national electrical codes, regulations and
must be installed by a licensed electrician.
2. All electrical connections must be made according to the Electrical Connection
Diagram located on the panels of the indoor and outdoor units.
3. If there is a serious safety issue with the power supply, stop work immediately.
Explain your reasoning to the client, and refuse to install the unit until the safety
issue is properly resolved.
4. If connecting power to fixed wiring, a switch or circuit breaker that disconnects all
poles and has a contact separation of at least 1/8in (3mm) must be incorporated in
the fixed wiring. The qualified technician must use an approved circuit breaker or
switch.
5. Only connect the unit to an individual branch circuit outlet. Do not connect another
appliance to that outlet.
6. Make sure to properly ground the air conditioner.
7. Every wire must be firmly connected. Loose wiring can cause the terminal to
overheat, resulting in product malfunction and possible fire.
8. Do not let wires touch or rest against refrigerant tubing, the compressor, or any
moving parts within the unit.
9. To avoid getting an electric shock, never touch the electrical components soon
after the power supply has been turned o. After turning o the power, always
wait 10 minutes or more before you touch the electrical components.
10. Power voltage should be within 90-110% of rated voltage. Insucient power
supply can cause malfunction, electrical shock, or fire.
WARNING
All wiring must be performed strictly in accordance with the wiring diagram
located on the back of the Indoor Unit’s front panel.
BEFORE PERFORMING ANY ELECTRLCAL OR WIRING WORK, TURN OFF
THE MAIN POWER TO THE SYSTEM.
●
●
WARNING
Bekijk gratis de handleiding van Midea EZ-12RD6-I, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | EZ-12RD6-I |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 20817 MB |
