Handleiding
Je bekijkt pagina 134 van 180
The left and right airflow must be set manually.
Grip the deflector rod (See Fig.B) and manually
adjust it to your preferred direction.
For some units, the left and right airflow can
be set by remote control. Please refer to the
Remote Control Manual.
Fig. B
Setting left and right air flow (Manual operation)
Do not put your fingers in or near the blower and suction side of the unit. The
high-speed fan inside the unit may cause injury.
Note on louver angles
●
Do not set louver at too vertical an angle for long periods of time
When using COOL or DRY mode. It would be condense the water
on the louver blade, which will drop on your floor or furnishings.
●
Setting the louver at too small an angle when using COOL or HEAT
mode, can reduce the performance of the AC due to restricted
air flow.
Setting angle of airflow
CAUTION
While the unit is on, use the SWING button on remote control to set the direction (up and down) of
airflow. Please refer to the Remote Control operationl for details.
NOTE
: Setting up and down airflow(Remote control)
Deflector rod
Do not move louver by hand. You can turn o the unit and unplug it for a few seconds to restart
the unit. It will be reset the louver when you try.
NOTE
●
According to the relative standards requirement, please set the louver
to its maximum airflow angle under heating capacity test.
Heating
Capacity
Test
12
Bekijk gratis de handleiding van Midea EZ-12RD6-I, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | EZ-12RD6-I |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 20817 MB |
