Middle Atlantic RLNK-410R-IEC-NS handleiding

Niet gecategoriseerd

Middle Atlantic

72 pagina's

PDF beschikbaar

Handleiding

UNDERSTANDING AN AUTOPING CONFIGURATION

Page 57

• You can configure the IP Address to Ping Google’s DNS server at 8.8.8.8. However,

this address could be the outside interface of your router or your next hop to the

Internet. Find your next hop to the Internet by issuing the following at the command

prompt:

tracert www.google.com

The next hop is the first address that is not internal or private. In this screenshot, the

next hop is 65.122.56.65.

• Configure the Frequency.

This is the time (in seconds) between each Ping. You can set it as short as 30 seconds.

More frequent Pings mean that your RackLink device will respond to outages quicker.

However, more frequent Pings does increase your network traffic and may have an

adverse effect on your network throughput.

• Configure the Failures to 3. With a Frequency of 30 seconds and 3 Failures, the device

being Pinged would need to be offline for 90 seconds before the recovery action is

executed.

• Configure the Recovery to “Power-Cycle Until Recovery”. This results in the outlet

continuously cycling until an Internet connection is reestablished.

• Configure the Cycle-Time for your power cycle delay to 150 seconds.

NOTE: We are using 150 seconds because we assumed our start-up time to be 2

minutes and a Frequency of 30 seconds. For more information, see “Calculating

Frequency, Failures, and Cycles” on page 55.

Bekijk gratis de handleiding van Middle Atlantic RLNK-410R-IEC-NS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.