Middle Atlantic RLNK-410R-IEC-NS handleiding

Niet gecategoriseerd

Middle Atlantic

72 pagina's

PDF beschikbaar

Handleiding

SETTING UP YOUR RACKLINK DEVICE FOR THE FIRST TIME

Page 25

To configure TCP/IP in RackLink via the browser-based interface:

1. With your RackLink device still powered off, plug one end of the network crossover cable into

the network jack on the rear of your RackLink device.

2. Plug the other end of the network crossover cable into the PC’s network jack.

3. Plug in and power on your RackLink device.

NOTE:

• After a few seconds, the computer and the RackLink unit should establish a network

connection.

• The RackLink's alert light blinks red when it is attempting to acquire a network address.

The alert light stops blinking once it has a valid TCP/IP address.

4. Open a web browser on the PC (Microsoft Internet Explorer 9 or later is recommended) and

navigate to http://192.168.1.200.

5. Log in to the browser-based interface with the administrator account.

For more information, see “Logging in to the Administrator Settings Menu” on page 40.

6. Click Network.

7. Change the network information to your preferred values for IP Address, Subnet Mask,

Gateway, and DNS Server.

8. Click Save.

NOTE: After these settings have been changed, you no longer can access your RackLink

device from your PC connected via crossover cable.

9. Disconnect the network crossover cable connecting your RackLink device and your PC.

10. Restore the PC to the original TCP/IP settings using the information you wrote down during

“Configuring TCP/IP on your PC” on page 20.

11. Put your RackLink device in its final location.

Bekijk gratis de handleiding van Middle Atlantic RLNK-410R-IEC-NS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.