Middle Atlantic RK-GD10 handleiding
Handleiding
Je bekijkt pagina 3 van 4
Page 3
1) Determine desired hinge side and install
pivot bushings in top and bottom of rack.
(FIGURE A)
NOTE: Two bushing sizes are provided.
Use appropriate size bushing for your rack.
2) Remove adhesive backing and install both
hinge plates on inside of glass door. (FIGURE B)
LOCKING
BRACKET
WOOD SCREWS
(2) PAN HEAD
MAGNET
INSTALLATION
TOP HINGE
FIGURE A
HINGE
PLATES (2)
FIGURE C
FIGURE D
FIGURE E
PIVOT
BUSHING
(TOP)
HINGE
PIVOT
BUSHING
(BOTTOM)
HINGE
PLATE
BOTTOM
HINGE
SCREWS (2)
FIGURE B
3) Slide bottom hinge against door and adjust so that hinge is flush with edge of door.
(FIGURE C, FIGURE D)
4) Tighten (2) screws to secure bottom hinge to hinge plate. (FIGURE C)
NOTE: Do not over tighten.
5) Pivot door into bottom pivot bushing. (FIGURE C)
6) Insert upper hinge into top pivot bushing and hold hinge in place with hand.
(FIGURE A)
7) Slide door into top hinge and adjust position of door, so that
hinge is flush with edge of door. (FIGURE D)
8) Tighten (2) screws to secure upper hinge to hinge plate.
NOTE: Do not over tighten.
9) If neccessary, adjust hinges to balance door opening gaps.
10) Attach locking bracket opposite hinge side with (2) wood
screws provided. Install magnet as shown. (FIGURE E)
PIVOT
BUSHING
(BOTTOM)
FLUSH
EDGE
Bekijk gratis de handleiding van Middle Atlantic RK-GD10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Middle Atlantic |
| Model | RK-GD10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 468 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Breedte | 474.7 mm |
| Diepte | 58.42 mm |
| Hoogte | 442.72 mm |
| Gewicht verpakking | 3630 g |
