Handleiding
Je bekijkt pagina 34 van 58
34 M1179886
6. Align the C-cover – Properly align the cover to the unit using the front edge alignment posts. Carefully
place the C-cover back onto the unit and shift until the C-cover snaps into place. The top C-cover area under
the display will protrude slightly after C-cover is placed. Press rmly on the top area until you hear a click and
the C-cover attens out.
CAUTION: Ensure that the C-cover is correctly aligned and seated before closing the device. There is the
risk of breaking the display if the device lid is closed before C-cover is aligned.
7. Install C-cover Screws – Close the AB-cover. Turn the unit over and use a 5IP screwdriver to install 4 new
screws to secure the C-cover. Screws should be installed until just snug and seated, and then turned another
45 degrees (1/8 turn) or until fully fastened.
8. Run SDT – Run SDT to ensure all device features and functions operate as expected. Refer to (page 17) for
details on SDT.
9. Install Feet – If SDT tests pass and no further repairs are to be performed on the device, follow steps for
Procedure – Installation (Non-Skid Feet) on page 20.
Bekijk gratis de handleiding van Microsoft Surface Laptop Go 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Microsoft |
| Model | Surface Laptop Go 3 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 6078 MB |
Caratteristiche Prodotto
| Kleur van het product | Platina |
| Gewicht | 1130 g |
| Breedte | 278 mm |
| Diepte | 206 mm |
| Hoogte | 15.7 mm |