Handleiding
Je bekijkt pagina 21 van 58
21 M1179886
5. Clamp replaced feet – Align and center the press head of the clamp onto the rear feet. Clamp both rear feet
for 4 minutes.
6. Inspect for anomalies – Inspect feet to ensure no cosmetic damage or gaps between the feet and the
D-bucket exist.
a. If gap exists, use a feeler gauge to verify gap is smaller than 0.05 mm. If gap is larger, replace foot.
7. Run SDT – Run SDT to ensure all device features and functions operate as expected.
IMPORTANT: Before transporting the device, we recommend letting it sit feet-down on a tabletop for
at least 12 hours. If this isn’t possible, it’s recommended to avoid placing the device in a backpack, purse,
other types of carriers, until at least 12 hours after installing new feet.
Bekijk gratis de handleiding van Microsoft Surface Laptop Go 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Microsoft |
| Model | Surface Laptop Go 3 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 6078 MB |
Caratteristiche Prodotto
| Kleur van het product | Platina |
| Gewicht | 1130 g |
| Breedte | 278 mm |
| Diepte | 206 mm |
| Hoogte | 15.7 mm |